Context Navigation

← Previous Revision
Latest Revision
Next Revision →
Annotate
Revision Log

sim_tb_top.vhd @ 10

Revision 10, 32.5 KB checked in by pntsvt00, 13 years ago (diff)
versione sintetizzabile

Line
1	--*****************************************************************************
2	-- DISCLAIMER OF LIABILITY
3	--
4	-- This file contains proprietary and confidential information of
5	-- Xilinx, Inc. ("Xilinx"), that is distributed under a license
6	-- from Xilinx, and may be used, copied and/or disclosed only
7	-- pursuant to the terms of a valid license agreement with Xilinx.
8	--
9	-- XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION
10	-- ("MATERIALS") "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
11	-- EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING WITHOUT
12	-- LIMITATION, ANY WARRANTY WITH RESPECT TO NONINFRINGEMENT,
13	-- MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Xilinx
14	-- does not warrant that functions included in the Materials will
15	-- meet the requirements of Licensee, or that the operation of the
16	-- Materials will be uninterrupted or error-free, or that defects
17	-- in the Materials will be corrected. Furthermore, Xilinx does
18	-- not warrant or make any representations regarding use, or the
19	-- results of the use, of the Materials in terms of correctness,
20	-- accuracy, reliability or otherwise.
21	--
22	-- Xilinx products are not designed or intended to be fail-safe,
23	-- or for use in any application requiring fail-safe performance,
24	-- such as life-support or safety devices or systems, Class III
25	-- medical devices, nuclear facilities, applications related to
26	-- the deployment of airbags, or any other applications that could
27	-- lead to death, personal injury or severe property or
28	-- environmental damage (individually and collectively, "critical
29	-- applications"). Customer assumes the sole risk and liability
30	-- of any use of Xilinx products in critical applications,
31	-- subject only to applicable laws and regulations governing
32	-- limitations on product liability.
33	--
34	-- Copyright 2006, 2007, 2008 Xilinx, Inc.
35	-- All rights reserved.
36	--
37	-- This disclaimer and copyright notice must be retained as part
38	-- of this file at all times.
39	--*****************************************************************************
40	-- ____ ____
41	-- / /\/ /
42	-- /___/ \ / Vendor : Xilinx
43	-- \ \ \/ Version : 3.6
44	-- \ \ Application : MIG
45	-- / / Filename : sim_tb_top.vhd
46	-- /___/ /\ Date Last Modified : $Date: 2010/06/29 12:03:42 $
47	-- \ \ / \ Date Created : Mon May 14 2007
48	-- \___\/\___\
49	--
50	-- Device : Virtex-5
51	-- Design Name : DDR2
52	-- Purpose : This is the simulation testbench which is used to verify the
53	-- design. The basic clocks and resets to the interface are
54	-- generated here. This also connects the memory interface to the
55	-- memory model.
56	-- Reference:
57	-- Revision History:
58	--*****************************************************************************
59
60	library ieee;
61	use ieee.std_logic_1164.all;
62	use ieee.numeric_std.all;
63	library unisim;
64	use unisim.vcomponents.all;
65
66	entity sim_tb_top is
67
68	end entity sim_tb_top;
69
70	architecture arch of sim_tb_top is
71
72	-- memory controller parameters
73	constant BANK_WIDTH : integer := 2; -- # of memory bank addr bits
74	constant CKE_WIDTH : integer := 1; -- # of memory clock enable outputs
75	constant CLK_WIDTH : integer := 1; -- # of clock outputs
76	constant CLK_TYPE : string := "SINGLE_ENDED"; -- # of clock type
77	constant COL_WIDTH : integer := 10; -- # of memory column bits
78	constant CS_NUM : integer := 1; -- # of separate memory chip selects
79	constant CS_WIDTH : integer := 1; -- # of total memory chip selects
80	constant CS_BITS : integer := 0; -- set to log2(CS_NUM) (rounded up)
81	constant DM_WIDTH : integer := 9; -- # of data mask bits
82	constant DQ_WIDTH : integer := 72; -- # of data width
83	constant DQ_PER_DQS : integer := 8; -- # of DQ data bits per strobe
84	constant DQ_BITS : integer := 7; -- set to log2(DQS_WIDTH*DQ_PER_DQS)
85	constant DQS_WIDTH : integer := 9; -- # of DQS strobes
86	constant DQS_BITS : integer := 4; -- set to log2(DQS_WIDTH)
87	constant HIGH_PERFORMANCE_MODE : boolean := TRUE; -- Sets the performance mode for IODELAY elements
88	constant ODT_WIDTH : integer := 1; -- # of memory on-die term enables
89	constant ROW_WIDTH : integer := 14; -- # of memory row & # of addr bits
90	constant APPDATA_WIDTH : integer := 144; -- # of usr read/write data bus bits
91	constant ADDITIVE_LAT : integer := 0; -- additive write latency
92	constant BURST_LEN : integer := 4; -- burst length (in double words)
93	constant BURST_TYPE : integer := 0; -- burst type (=0 seq; =1 interlved)
94	constant CAS_LAT : integer := 3; -- CAS latency
95	constant ECC_ENABLE : integer := 0; -- enable ECC (=1 enable)
96	constant MULTI_BANK_EN : integer := 1; -- enable bank management
97	constant TWO_T_TIME_EN : integer := 1; -- 2t timing for unbuffered dimms
98	constant ODT_TYPE : integer := 1; -- ODT (=0(none),=1(75),=2(150),=3(50))
99	constant REDUCE_DRV : integer := 0; -- reduced strength mem I/O (=1 yes)
100	constant REG_ENABLE : integer := 0; -- registered addr/ctrl (=1 yes)
101	constant TREFI_NS : integer := 7800; -- auto refresh interval (ns)
102	constant TRAS : integer := 40000; -- active->precharge delay
103	constant TRCD : integer := 15000; -- active->read/write delay
104	constant TRFC : integer := 105000; -- ref->ref, ref->active delay
105	constant TRP : integer := 15000; -- precharge->command delay
106	constant TRTP : integer := 7500; -- read->precharge delay
107	constant TWR : integer := 15000; -- used to determine wr->prech
108	constant TWTR : integer := 7500; -- write->read delay
109	constant SIM_ONLY : integer := 1; -- = 0 to allow power up delay
110	constant DEBUG_EN : integer := 0; -- Enable debug signals/controls
111	constant RST_ACT_LOW : integer := 1; -- =1 for active low reset, =0 for active high
112	constant DLL_FREQ_MODE : string := "HIGH"; -- DCM Frequency range
113	constant CLK_PERIOD : integer := 5000; -- Core/Mem clk period (in ps)
114
115	constant DEVICE_WIDTH : integer := 8; -- Memory device data width
116	constant CLK_PERIOD_NS : real := 5000.0 / 1000.0;
117	constant TCYC_SYS : real := CLK_PERIOD_NS/2.0;
118	constant TCYC_SYS_0 : time := CLK_PERIOD_NS * 1 ns;
119	constant TCYC_SYS_DIV2 : time := TCYC_SYS * 1 ns;
120	constant TEMP2 : real := 5.0/2.0;
121	constant TCYC_200 : time := TEMP2 * 1 ns;
122	constant TPROP_DQS : time := 0.01 ns; -- Delay for DQS signal during Write Operation
123	constant TPROP_DQS_RD : time := 0.01 ns; -- Delay for DQS signal during Read Operation
124	constant TPROP_PCB_CTRL : time := 0.01 ns; -- Delay for Address and Ctrl signals
125	constant TPROP_PCB_DATA : time := 0.01 ns; -- Delay for data signal during Write operation
126	constant TPROP_PCB_DATA_RD : time := 0.01 ns; -- Delay for data signal during Read operation
127
128
129	component dram is
130	generic (
131	BANK_WIDTH : integer;
132	CKE_WIDTH : integer;
133	CLK_WIDTH : integer;
134	COL_WIDTH : integer;
135	CS_NUM : integer;
136	CS_WIDTH : integer;
137	CS_BITS : integer;
138	DM_WIDTH : integer;
139	DQ_WIDTH : integer;
140	DQ_PER_DQS : integer;
141	DQ_BITS : integer;
142	DQS_WIDTH : integer;
143	DQS_BITS : integer;
144	HIGH_PERFORMANCE_MODE : boolean;
145	ODT_WIDTH : integer;
146	ROW_WIDTH : integer;
147	APPDATA_WIDTH : integer;
148	ADDITIVE_LAT : integer;
149	BURST_LEN : integer;
150	BURST_TYPE : integer;
151	CAS_LAT : integer;
152	ECC_ENABLE : integer;
153	MULTI_BANK_EN : integer;
154	ODT_TYPE : integer;
155	REDUCE_DRV : integer;
156	REG_ENABLE : integer;
157	TREFI_NS : integer;
158	TRAS : integer;
159	TRCD : integer;
160	TRFC : integer;
161	TRP : integer;
162	TRTP : integer;
163	TWR : integer;
164	TWTR : integer;
165	SIM_ONLY : integer;
166	RST_ACT_LOW : integer;
167	CLK_TYPE : string;
168	DLL_FREQ_MODE : string;
169	CLK_PERIOD : integer
170	);
171	port (
172	sys_rst_n : in std_logic;
173	sys_clk : in std_logic;
174	idly_clk_200 : in std_logic;
175	ddr2_a : out std_logic_vector((ROW_WIDTH-1) downto 0);
176	ddr2_ba : out std_logic_vector((BANK_WIDTH-1) downto 0);
177	ddr2_ras_n : out std_logic;
178	ddr2_cas_n : out std_logic;
179	ddr2_we_n : out std_logic;
180	ddr2_cs_n : out std_logic_vector((CS_WIDTH-1) downto 0);
181	ddr2_odt : out std_logic_vector((ODT_WIDTH-1) downto 0);
182	ddr2_cke : out std_logic_vector((CKE_WIDTH-1) downto 0);
183	ddr2_ck : out std_logic_vector((CLK_WIDTH-1) downto 0);
184	ddr2_ck_n : out std_logic_vector((CLK_WIDTH-1) downto 0);
185	ddr2_dq : inout std_logic_vector((DQ_WIDTH-1) downto 0);
186	ddr2_dqs : inout std_logic_vector((DQS_WIDTH-1) downto 0);
187	ddr2_dqs_n : inout std_logic_vector((DQS_WIDTH-1) downto 0);
188	ddr2_dm : out std_logic_vector((DM_WIDTH-1) downto 0);
189
190	error : out std_logic;
191
192	phy_init_done : out std_logic
193	);
194	end component;
195
196	component ddr2_model is
197	port (
198	ck : in std_logic;
199	ck_n : in std_logic;
200	cke : in std_logic;
201	cs_n : in std_logic;
202	ras_n : in std_logic;
203	cas_n : in std_logic;
204	we_n : in std_logic;
205	dm_rdqs : inout std_logic_vector((DEVICE_WIDTH/16) downto 0);
206	ba : in std_logic_vector((BANK_WIDTH - 1) downto 0);
207	addr : in std_logic_vector((ROW_WIDTH - 1) downto 0);
208	dq : inout std_logic_vector((DEVICE_WIDTH - 1) downto 0);
209	dqs : inout std_logic_vector((DEVICE_WIDTH/16) downto 0);
210	dqs_n : inout std_logic_vector((DEVICE_WIDTH/16) downto 0);
211	rdqs_n : out std_logic_vector((DEVICE_WIDTH/16) downto 0);
212	odt : in std_logic
213	);
214	end component;
215
216	component WireDelay
217	generic (
218	Delay_g : time;
219	Delay_rd : time);
220	port (
221	A : inout Std_Logic;
222	B : inout Std_Logic;
223	reset : in Std_Logic);
224	end component;
225
226	signal sys_clk : std_logic := '0';
227	signal sys_clk_n : std_logic;
228	signal sys_clk_p : std_logic;
229	signal sys_clk200 : std_logic:= '0';
230	signal clk200_n : std_logic;
231	signal clk200_p : std_logic;
232	signal sys_rst_n : std_logic := '0';
233	signal sys_rst_out : std_logic;
234	signal sys_rst_i : std_logic;
235	signal gnd : std_logic_vector(1 downto 0);
236
237	signal ddr2_dq_sdram : std_logic_vector((DQ_WIDTH - 1) downto 0);
238	signal ddr2_dqs_sdram : std_logic_vector((DQS_WIDTH - 1) downto 0);
239	signal ddr2_dqs_n_sdram : std_logic_vector((DQS_WIDTH - 1) downto 0);
240	signal ddr2_dm_sdram : std_logic_vector((DM_WIDTH - 1) downto 0);
241	signal ddr2_clk_sdram : std_logic_vector((CLK_WIDTH - 1) downto 0);
242	signal ddr2_clk_n_sdram : std_logic_vector((CLK_WIDTH - 1) downto 0);
243	signal ddr2_address_sdram : std_logic_vector((ROW_WIDTH - 1) downto 0);
244	signal ddr2_ba_sdram : std_logic_vector((BANK_WIDTH - 1) downto 0);
245	signal ddr2_ras_n_sdram : std_logic;
246	signal ddr2_cas_n_sdram : std_logic;
247	signal ddr2_we_n_sdram : std_logic;
248	signal ddr2_cs_n_sdram : std_logic_vector((CS_WIDTH - 1) downto 0);
249	signal ddr2_cke_sdram : std_logic_vector((CKE_WIDTH - 1) downto 0);
250	signal ddr2_odt_sdram : std_logic_vector((ODT_WIDTH - 1) downto 0);
251	signal error : std_logic;
252	signal phy_init_done : std_logic;
253
254
255	-- Only RDIMM memory parts support the reset signal,
256	-- hence the ddr2_reset_n_sdram and ddr2_reset_n_fpga signals can be
257	-- ignored for other memory parts
258	signal ddr2_reset_n_sdram : std_logic;
259	signal ddr2_reset_n_fpga : std_logic;
260	signal ddr2_address_reg : std_logic_vector((ROW_WIDTH - 1) downto 0);
261	signal ddr2_ba_reg : std_logic_vector((BANK_WIDTH - 1) downto 0);
262	signal ddr2_cke_reg : std_logic_vector((CKE_WIDTH - 1) downto 0);
263	signal ddr2_ras_n_reg : std_logic;
264	signal ddr2_cas_n_reg : std_logic;
265	signal ddr2_we_n_reg : std_logic;
266	signal ddr2_cs_n_reg : std_logic_vector((CS_WIDTH - 1) downto 0);
267	signal ddr2_odt_reg : std_logic_vector((ODT_WIDTH - 1) downto 0);
268
269	signal dq_vector : std_logic_vector(15 downto 0);
270	signal dqs_vector : std_logic_vector(1 downto 0);
271	signal dqs_n_vector : std_logic_vector(1 downto 0);
272	signal dm_vector : std_logic_vector(1 downto 0);
273	signal command : std_logic_vector(2 downto 0);
274	signal enable : std_logic;
275	signal enable_o : std_logic;
276	signal ddr2_dq_fpga : std_logic_vector((DQ_WIDTH - 1) downto 0);
277	signal ddr2_dqs_fpga : std_logic_vector((DQS_WIDTH - 1) downto 0);
278	signal ddr2_dqs_n_fpga : std_logic_vector((DQS_WIDTH - 1) downto 0);
279	signal ddr2_dm_fpga : std_logic_vector((DM_WIDTH - 1) downto 0);
280	signal ddr2_clk_fpga : std_logic_vector((CLK_WIDTH - 1) downto 0);
281	signal ddr2_clk_n_fpga : std_logic_vector((CLK_WIDTH - 1) downto 0);
282	signal ddr2_address_fpga : std_logic_vector((ROW_WIDTH - 1) downto 0);
283	signal ddr2_ba_fpga : std_logic_vector((BANK_WIDTH - 1) downto 0);
284	signal ddr2_ras_n_fpga : std_logic;
285	signal ddr2_cas_n_fpga : std_logic;
286	signal ddr2_we_n_fpga : std_logic;
287	signal ddr2_cs_n_fpga : std_logic_vector((CS_WIDTH - 1) downto 0);
288	signal ddr2_cke_fpga : std_logic_vector((CKE_WIDTH - 1) downto 0);
289	signal ddr2_odt_fpga : std_logic_vector((ODT_WIDTH - 1) downto 0);
290
291	begin
292	gnd <= "00";
293	--***************************************************************************
294	-- Clock generation and reset
295	--***************************************************************************
296	process
297	begin
298	sys_clk <= not sys_clk;
299	wait for (TCYC_SYS_DIV2);
300	end process;
301
302	sys_clk_p <= sys_clk;
303	sys_clk_n <= not sys_clk;
304
305	process
306	begin
307	sys_clk200 <= not sys_clk200;
308	wait for (TCYC_200);
309	end process;
310
311	clk200_p <= sys_clk200;
312	clk200_n <= not sys_clk200;
313
314	process
315	begin
316	sys_rst_n <= '0';
317	wait for 200 ns;
318	sys_rst_n <= '1';
319	wait;
320	end process;
321
322	sys_rst_i <= not sys_rst_n;
323	sys_rst_out <= (sys_rst_n) when (RST_ACT_LOW = 1) else (not sys_rst_n);
324
325
326	--***************************************************************************
327	-- FPGA memory controller
328	--***************************************************************************
329
330	u_mem_controller : dram
331	generic map (
332	BANK_WIDTH => BANK_WIDTH,
333	CKE_WIDTH => CKE_WIDTH,
334	CLK_WIDTH => CLK_WIDTH,
335	COL_WIDTH => COL_WIDTH,
336	CS_NUM => CS_NUM,
337	CS_WIDTH => CS_WIDTH,
338	CS_BITS => CS_BITS,
339	DM_WIDTH => DM_WIDTH,
340	DQ_WIDTH => DQ_WIDTH,
341	DQ_PER_DQS => DQ_PER_DQS,
342	DQ_BITS => DQ_BITS,
343	DQS_WIDTH => DQS_WIDTH,
344	DQS_BITS => DQS_BITS,
345	HIGH_PERFORMANCE_MODE => HIGH_PERFORMANCE_MODE,
346	ODT_WIDTH => ODT_WIDTH,
347	ROW_WIDTH => ROW_WIDTH,
348	APPDATA_WIDTH => APPDATA_WIDTH,
349	ADDITIVE_LAT => ADDITIVE_LAT,
350	BURST_LEN => BURST_LEN,
351	BURST_TYPE => BURST_TYPE,
352	CAS_LAT => CAS_LAT,
353	ECC_ENABLE => ECC_ENABLE,
354	MULTI_BANK_EN => MULTI_BANK_EN,
355	ODT_TYPE => ODT_TYPE,
356	REDUCE_DRV => REDUCE_DRV,
357	REG_ENABLE => REG_ENABLE,
358	TREFI_NS => TREFI_NS,
359	TRAS => TRAS,
360	TRCD => TRCD,
361	TRFC => TRFC,
362	TRP => TRP,
363	TRTP => TRTP,
364	TWR => TWR,
365	TWTR => TWTR,
366	SIM_ONLY => SIM_ONLY,
367	RST_ACT_LOW => RST_ACT_LOW,
368	CLK_TYPE => CLK_TYPE,
369	DLL_FREQ_MODE => DLL_FREQ_MODE,
370	CLK_PERIOD => CLK_PERIOD
371	)
372	port map (
373	sys_clk => sys_clk_p,
374	idly_clk_200 => clk200_p,
375	sys_rst_n => sys_rst_out,
376	ddr2_ras_n => ddr2_ras_n_fpga,
377	ddr2_cas_n => ddr2_cas_n_fpga,
378	ddr2_we_n => ddr2_we_n_fpga,
379	ddr2_cs_n => ddr2_cs_n_fpga,
380	ddr2_cke => ddr2_cke_fpga,
381	ddr2_odt => ddr2_odt_fpga,
382	ddr2_dm => ddr2_dm_fpga,
383	ddr2_dq => ddr2_dq_fpga,
384	ddr2_dqs => ddr2_dqs_fpga,
385	ddr2_dqs_n => ddr2_dqs_n_fpga,
386	ddr2_ck => ddr2_clk_fpga,
387	ddr2_ck_n => ddr2_clk_n_fpga,
388	ddr2_ba => ddr2_ba_fpga,
389	ddr2_a => ddr2_address_fpga,
390
391	error => error,
392
393	phy_init_done => phy_init_done
394	);
395
396	--***************************************************************************
397	-- Delay insertion modules for each signal
398	--***************************************************************************
399	-- Use standard non-inertial (transport) delay mechanism for unidirectional
400	-- signals from FPGA to SDRAM
401	ddr2_address_sdram <= TRANSPORT ddr2_address_fpga after TPROP_PCB_CTRL;
402	ddr2_ba_sdram <= TRANSPORT ddr2_ba_fpga after TPROP_PCB_CTRL;
403	ddr2_ras_n_sdram <= TRANSPORT ddr2_ras_n_fpga after TPROP_PCB_CTRL;
404	ddr2_cas_n_sdram <= TRANSPORT ddr2_cas_n_fpga after TPROP_PCB_CTRL;
405	ddr2_we_n_sdram <= TRANSPORT ddr2_we_n_fpga after TPROP_PCB_CTRL;
406	ddr2_cs_n_sdram <= TRANSPORT ddr2_cs_n_fpga after TPROP_PCB_CTRL;
407	ddr2_cke_sdram <= TRANSPORT ddr2_cke_fpga after TPROP_PCB_CTRL;
408	ddr2_odt_sdram <= TRANSPORT ddr2_odt_fpga after TPROP_PCB_CTRL;
409	ddr2_clk_sdram <= TRANSPORT ddr2_clk_fpga after TPROP_PCB_CTRL;
410	ddr2_clk_n_sdram <= TRANSPORT ddr2_clk_n_fpga after TPROP_PCB_CTRL;
411	ddr2_reset_n_sdram <= TRANSPORT ddr2_reset_n_fpga after TPROP_PCB_CTRL;
412	ddr2_dm_sdram <= TRANSPORT ddr2_dm_fpga after TPROP_PCB_DATA;
413
414	dq_delay: for i in 0 to DQ_WIDTH - 1 generate
415	u_delay_dq: WireDelay
416	generic map (
417	Delay_g => TPROP_PCB_DATA,
418	Delay_rd => TPROP_PCB_DATA_RD)
419	port map(
420	A => ddr2_dq_fpga(i),
421	B => ddr2_dq_sdram(i),
422	reset => sys_rst_n);
423	end generate;
424
425	dqs_delay: for i in 0 to DQS_WIDTH - 1 generate
426	u_delay_dqs: WireDelay
427	generic map (
428	Delay_g => TPROP_DQS,
429	Delay_rd => TPROP_DQS_RD)
430	port map(
431	A => ddr2_dqs_fpga(i),
432	B => ddr2_dqs_sdram(i),
433	reset => sys_rst_n);
434	end generate;
435
436	dqs_n_delay: for i in 0 to DQS_WIDTH - 1 generate
437	u_delay_dqs: WireDelay
438	generic map (
439	Delay_g => TPROP_DQS,
440	Delay_rd => TPROP_DQS_RD)
441	port map(
442	A => ddr2_dqs_n_fpga(i),
443	B => ddr2_dqs_n_sdram(i),
444	reset => sys_rst_n);
445	end generate;
446
447	-- Extra one clock pipelining for RDIMM address and
448	-- control signals is implemented here (Implemented external to memory model)
449	process (ddr2_clk_sdram)
450	begin
451	if (rising_edge(ddr2_clk_sdram(0))) then
452	if ( ddr2_reset_n_sdram = '0' ) then
453	ddr2_ras_n_reg <= '1';
454	ddr2_cas_n_reg <= '1';
455	ddr2_we_n_reg <= '1';
456	ddr2_cs_n_reg <= (others => '1');
457	ddr2_odt_reg <= (others => '0');
458	else
459	ddr2_address_reg <= TRANSPORT ddr2_address_sdram after TCYC_SYS_DIV2;
460	ddr2_ba_reg <= TRANSPORT ddr2_ba_sdram after TCYC_SYS_DIV2;
461	ddr2_ras_n_reg <= TRANSPORT ddr2_ras_n_sdram after TCYC_SYS_DIV2;
462	ddr2_cas_n_reg <= TRANSPORT ddr2_cas_n_sdram after TCYC_SYS_DIV2;
463	ddr2_we_n_reg <= TRANSPORT ddr2_we_n_sdram after TCYC_SYS_DIV2;
464	ddr2_cs_n_reg <= TRANSPORT ddr2_cs_n_sdram after TCYC_SYS_DIV2;
465	ddr2_odt_reg <= TRANSPORT ddr2_odt_sdram after TCYC_SYS_DIV2;
466	end if;
467	end if;
468	end process;
469
470	-- to avoid tIS violations on CKE when reset is deasserted
471	process (ddr2_clk_n_sdram)
472	begin
473	if (rising_edge(ddr2_clk_n_sdram(0))) then
474	if ( ddr2_reset_n_sdram = '0' ) then
475	ddr2_cke_reg <= (others => '0');
476	else
477	ddr2_cke_reg <= TRANSPORT ddr2_cke_sdram after TCYC_SYS_0;
478	end if;
479	end if;
480	end process;
481
482	--***************************************************************************
483	-- Memory model instances
484	--***************************************************************************
485
486	comp_16: if (DEVICE_WIDTH = 16) generate
487	-- if memory part is x16
488	registered_dimm: if (REG_ENABLE = 1) generate
489	-- if the memory part is Registered DIMM
490	gen_cs: for j in 0 to (CS_NUM - 1) generate
491	gen: for i in 0 to (DQS_WIDTH/2 - 1) generate
492	u_mem0: ddr2_model
493	port map (
494	ck => ddr2_clk_sdram(CLK_WIDTH*i/DQS_WIDTH),
495	ck_n => ddr2_clk_n_sdram(CLK_WIDTH*i/DQS_WIDTH),
496	cke => ddr2_cke_reg(j),
497	cs_n => ddr2_cs_n_reg((CS_WIDTH*i/DQS_WIDTH)),
498	ras_n => ddr2_ras_n_reg,
499	cas_n => ddr2_cas_n_reg,
500	we_n => ddr2_we_n_reg,
501	dm_rdqs => ddr2_dm_sdram((2(i+1))-1 downto i2),
502	ba => ddr2_ba_reg,
503	addr => ddr2_address_reg,
504	dq => ddr2_dq_sdram((16(i+1))-1 downto i16),
505	dqs => ddr2_dqs_sdram((2(i+1))-1 downto i2),
506	dqs_n => ddr2_dqs_n_sdram((2(i+1))-1 downto i2),
507	rdqs_n => open,
508	odt => ddr2_odt_reg(ODT_WIDTH*i/DQS_WIDTH)
509	);
510	end generate gen;
511	end generate gen_cs;
512	end generate registered_dimm;
513	-- if the memory part is component or unbuffered DIMM
514	comp16_mul8: if (((DQ_WIDTH mod 16) /= 0) and (REG_ENABLE = 0)) generate
515	-- for the memory part x16, if the data width is not multiple
516	-- of 16, memory models are instantiated for all data with x16
517	-- memory model and except for MSB data. For the MSB data
518	-- of 8 bits, all memory data, strobe and mask data signals are
519	-- replicated to make it as x16 part. For example if the design
520	-- is generated for data width of 72, memory model x16 parts
521	-- instantiated for 4 times with data ranging from 0 to 63.
522	-- For MSB data ranging from 64 to 71, one x16 memory model
523	-- by replicating the 8-bit data twice and similarly
524	-- the case with data mask and strobe.
525	gen_cs: for j in 0 to (CS_NUM - 1) generate
526	gen: for i in 0 to (DQ_WIDTH/16 - 1) generate
527	u_mem0: ddr2_model
528	port map (
529	ck => ddr2_clk_sdram(CLK_WIDTH*i/DQS_WIDTH),
530	ck_n => ddr2_clk_n_sdram(CLK_WIDTH*i/DQS_WIDTH),
531	cke => ddr2_cke_sdram(j),
532	cs_n => ddr2_cs_n_sdram(CS_WIDTH*i/DQS_WIDTH),
533	ras_n => ddr2_ras_n_sdram,
534	cas_n => ddr2_cas_n_sdram,
535	we_n => ddr2_we_n_sdram,
536	dm_rdqs => ddr2_dm_sdram((2(i+1))-1 downto i2),
537	ba => ddr2_ba_sdram,
538	addr => ddr2_address_sdram,
539	dq => ddr2_dq_sdram((16(i+1))-1 downto i16),
540	dqs => ddr2_dqs_sdram((2(i+1))-1 downto i2),
541	dqs_n => ddr2_dqs_n_sdram((2(i+1))-1 downto i2),
542	rdqs_n => open,
543	odt => ddr2_odt_sdram(ODT_WIDTH*i/DQS_WIDTH)
544	);
545	end generate gen;
546
547	--Logic to assign the remaining bits of DQ and DQS
548	u1: for i in 0 to 7 generate
549	u_delay_dq: WireDelay
550	generic map (
551	Delay_g => 0 ps,
552	Delay_rd => 0 ps)
553	port map(
554	A => ddr2_dq_sdram(DQ_WIDTH - 8 + i),
555	B => dq_vector(i),
556	reset => sys_rst_n);
557	end generate;
558
559	u2: WireDelay
560	generic map (
561	Delay_g => 0 ps,
562	Delay_rd => 0 ps)
563	port map(
564	A => ddr2_dqs_sdram(DQS_WIDTH - 1),
565	B => dqs_vector(0),
566	reset => sys_rst_n);
567
568	u3: WireDelay
569	generic map (
570	Delay_g => 0 ps,
571	Delay_rd => 0 ps)
572	port map(
573	A => ddr2_dqs_n_sdram(DQS_WIDTH - 1),
574	B => dqs_n_vector(0),
575	reset => sys_rst_n);
576
577	dq_vector(15 downto 8) <= dq_vector(7 downto 0);
578	dqs_vector(1) <= dqs_vector(0);
579	dqs_n_vector(1) <= dqs_n_vector(0);
580	dm_vector <= (ddr2_dm_sdram(DM_WIDTH - 1) &
581	ddr2_dm_sdram(DM_WIDTH - 1));
582
583	u_mem1: ddr2_model
584	port map (
585	ck => ddr2_clk_sdram(CLK_WIDTH-1),
586	ck_n => ddr2_clk_n_sdram(CLK_WIDTH-1),
587	cke => ddr2_cke_sdram(j),
588	cs_n => ddr2_cs_n_sdram(CS_WIDTH-1),
589	ras_n => ddr2_ras_n_sdram,
590	cas_n => ddr2_cas_n_sdram,
591	we_n => ddr2_we_n_sdram,
592	dm_rdqs => dm_vector,
593	ba => ddr2_ba_sdram,
594	addr => ddr2_address_sdram,
595	dq => dq_vector,
596	dqs => dqs_vector,
597	dqs_n => dqs_n_vector,
598	rdqs_n => open,
599	odt => ddr2_odt_sdram(ODT_WIDTH-1)
600	);
601	end generate gen_cs;
602	end generate comp16_mul8;
603	comp16_mul16: if (((DQ_WIDTH mod 16) = 0) and (REG_ENABLE = 0)) generate
604	-- if the data width is multiple of 16
605	gen_cs: for j in 0 to (CS_NUM - 1) generate
606	gen: for i in 0 to ((DQS_WIDTH/2) - 1) generate
607	u_mem0: ddr2_model
608	port map (
609	ck => ddr2_clk_sdram(CLK_WIDTH*i/DQS_WIDTH),
610	ck_n => ddr2_clk_n_sdram(CLK_WIDTH*i/DQS_WIDTH),
611	cke => ddr2_cke_sdram(j),
612	cs_n => ddr2_cs_n_sdram(CS_WIDTH*i/DQS_WIDTH),
613	ras_n => ddr2_ras_n_sdram,
614	cas_n => ddr2_cas_n_sdram,
615	we_n => ddr2_we_n_sdram,
616	dm_rdqs => ddr2_dm_sdram((2(i+1))-1 downto i2),
617	ba => ddr2_ba_sdram,
618	addr => ddr2_address_sdram,
619	dq => ddr2_dq_sdram((16(i+1))-1 downto i16),
620	dqs => ddr2_dqs_sdram((2(i+1))-1 downto i2),
621	dqs_n => ddr2_dqs_n_sdram((2(i+1))-1 downto i2),
622	rdqs_n => open,
623	odt => ddr2_odt_sdram(ODT_WIDTH*i/DQS_WIDTH)
624	);
625	end generate gen;
626	end generate gen_cs;
627	end generate comp16_mul16;
628	end generate comp_16;
629
630	comp_8: if (DEVICE_WIDTH = 8) generate
631	-- if the memory part is x8
632	registered_dimm: if (REG_ENABLE = 1) generate
633	-- if the memory part is Registered DIMM
634	gen_cs: for j in 0 to (CS_NUM - 1) generate
635	gen: for i in 0 to (DQS_WIDTH - 1) generate
636	u_mem0: ddr2_model
637	port map (
638	ck => ddr2_clk_sdram(CLK_WIDTH*i/DQS_WIDTH),
639	ck_n => ddr2_clk_n_sdram(CLK_WIDTH*i/DQS_WIDTH),
640	cke => ddr2_cke_reg(j),
641	cs_n => ddr2_cs_n_reg((CS_WIDTH*i/DQS_WIDTH)),
642	ras_n => ddr2_ras_n_reg,
643	cas_n => ddr2_cas_n_reg,
644	we_n => ddr2_we_n_reg,
645	dm_rdqs => ddr2_dm_sdram(i downto i),
646	ba => ddr2_ba_reg,
647	addr => ddr2_address_reg,
648	dq => ddr2_dq_sdram((8(i+1))-1 downto i8),
649	dqs => ddr2_dqs_sdram(i downto i),
650	dqs_n => ddr2_dqs_n_sdram(i downto i),
651	rdqs_n => open,
652	odt => ddr2_odt_reg(ODT_WIDTH*i/DQS_WIDTH)
653	);
654	end generate gen;
655	end generate gen_cs;
656	end generate registered_dimm;
657	comp8_mul8: if (REG_ENABLE = 0) generate
658	-- if the memory part is component or unbuffered DIMM
659	gen_cs: for j in 0 to (CS_NUM - 1) generate
660	gen: for i in 0 to DQS_WIDTH - 1 generate
661	u_mem0: ddr2_model
662	port map (
663	ck => ddr2_clk_sdram(CLK_WIDTH*i/DQS_WIDTH),
664	ck_n => ddr2_clk_n_sdram(CLK_WIDTH*i/DQS_WIDTH),
665	cke => ddr2_cke_sdram(j),
666	cs_n => ddr2_cs_n_sdram(CS_WIDTH*i/DQS_WIDTH),
667	ras_n => ddr2_ras_n_sdram,
668	cas_n => ddr2_cas_n_sdram,
669	we_n => ddr2_we_n_sdram,
670	dm_rdqs => ddr2_dm_sdram(i downto i),
671	ba => ddr2_ba_sdram,
672	addr => ddr2_address_sdram,
673	dq => ddr2_dq_sdram((8(i+1))-1 downto i8),
674	dqs => ddr2_dqs_sdram(i downto i),
675	dqs_n => ddr2_dqs_n_sdram(i downto i),
676	rdqs_n => open,
677	odt => ddr2_odt_sdram(ODT_WIDTH*i/DQS_WIDTH)
678	);
679	end generate gen;
680	end generate gen_cs;
681	end generate comp8_mul8;
682	end generate comp_8;
683
684	comp_4: if (DEVICE_WIDTH = 4) generate
685	-- if the memory part is x4
686	registered_dimm: if (REG_ENABLE = 1) generate
687	-- if the memory part is Registered DIMM
688	gen_cs: for j in 0 to (CS_NUM - 1) generate
689	gen: for i in 0 to (DQS_WIDTH - 1) generate
690	u_mem0: ddr2_model
691	port map (
692	ck => ddr2_clk_sdram(CLK_WIDTH*i/DQS_WIDTH),
693	ck_n => ddr2_clk_n_sdram(CLK_WIDTH*i/DQS_WIDTH),
694	cke => ddr2_cke_reg(j),
695	cs_n => ddr2_cs_n_reg((CS_WIDTH*i/DQS_WIDTH)),
696	ras_n => ddr2_ras_n_reg,
697	cas_n => ddr2_cas_n_reg,
698	we_n => ddr2_we_n_reg,
699	dm_rdqs => ddr2_dm_sdram(i downto i),
700	ba => ddr2_ba_reg,
701	addr => ddr2_address_reg,
702	dq => ddr2_dq_sdram((4(i+1))-1 downto i4),
703	dqs => ddr2_dqs_sdram(i downto i),
704	dqs_n => ddr2_dqs_n_sdram(i downto i),
705	rdqs_n => open,
706	odt => ddr2_odt_reg(ODT_WIDTH*i/DQS_WIDTH)
707	);
708	end generate gen;
709	end generate gen_cs;
710	end generate registered_dimm;
711	comp4_mul4: if (REG_ENABLE = 0) generate
712	-- if the memory part is component or unbuffered DIMM
713	gen_cs: for j in 0 to (CS_NUM - 1) generate
714	gen: for i in 0 to DQS_WIDTH - 1 generate
715	u_mem0: ddr2_model
716	port map (
717	ck => ddr2_clk_sdram(CLK_WIDTH*i/DQS_WIDTH),
718	ck_n => ddr2_clk_n_sdram(CLK_WIDTH*i/DQS_WIDTH),
719	cke => ddr2_cke_sdram(j),
720	cs_n => ddr2_cs_n_sdram(CS_WIDTH*i/DQS_WIDTH),
721	ras_n => ddr2_ras_n_sdram,
722	cas_n => ddr2_cas_n_sdram,
723	we_n => ddr2_we_n_sdram,
724	dm_rdqs => ddr2_dm_sdram(i downto i),
725	ba => ddr2_ba_sdram,
726	addr => ddr2_address_sdram,
727	dq => ddr2_dq_sdram((4(i+1))-1 downto i4),
728	dqs => ddr2_dqs_sdram(i downto i),
729	dqs_n => ddr2_dqs_n_sdram(i downto i),
730	rdqs_n => open,
731	odt => ddr2_odt_sdram(ODT_WIDTH*i/DQS_WIDTH)
732	);
733	end generate gen;
734	end generate gen_cs;
735	end generate comp4_mul4;
736	end generate comp_4;
737
738
739	end architecture;

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: XOpenSparcT1/trunk/sim/sim_tb_top.vhd @ 10

Download in other formats: